
Real-time display
The touch display on the tank and the smart app show the water temperature and how much hot water is left in the tank.
BAUF Multi DHW, Series T is a multi-split system that also heats your domestic water. One 8 kW outdoor unit cools and heats up to three rooms through wall-mounted, duct, cassette or console indoor units and keeps a 190 L tank of hot water ready at 30–55 °C, up to 75 °C with the electric heater. When the air conditioner cools, the heat removed from the rooms is recovered into the tank, so hot water comes free. Five operating modes, SG Ready, Wi-Fi control and hot water at outdoor temperatures down to −20 °C make it one system for comfort all year round.
Hot water is available immediately — no cold water from the pipes runs down the drain before it arrives.
In cooling mode, heat recovered from the refrigeration cycle heats the water in the tank at no extra cost.
Reliably meets domestic hot water demand even at outdoor temperatures down to −20 °C.
BAUF's advanced AI inverter algorithm improves the system's energy efficiency by up to 37%.
Communicates with the smart grid and switches between energy sources to optimise consumption and reduce energy costs.
Cooling, heating, hot water, heating + hot water and heat recovery — switch whenever you need.
Multi-split + DHW
The outdoor unit cools and heats up to three rooms and heats water in a 190 L tank — one system instead of an air conditioner and a separate water heater.

8kW
7.9 kW cooling, 8.2 kW heating
3
Wall-mounted, duct, cassette or console indoor units
190L
30–55 °C, up to 75 °C with the electric heater
A++
SEER 7.2 · SCOP 4.6 · R32

With a traditional water heater, the cold water standing in the pipes runs down the drain before the hot water arrives. Multi DHW, Series T keeps hot water ready at the taps, so it flows the moment you open them — no waiting and no wasted water.

Heat recovery
When the air conditioner cools, the heat removed from the rooms is not blown outside but transferred to the water tank. Summer cooling turns into hot water for the shower and the kitchen at no extra cost.
Cooling + hot water: the rooms are cooled while the tank is heated
Heating + hot water: the rooms and the water are heated together
The rest of the year — heat taken from the outdoor air

Air conditioning, hot water or both at once — switch between the modes whenever you need.
Cooling only
Heating only
Hot water only
Heating + hot water
Cooling + hot water with heat recovery

The system reliably meets hot water demand even at outdoor temperatures down to −20 °C.

BAUF's advanced AI inverter algorithm improves energy efficiency by up to 37%.

The unit responds to signals from the power grid and switches between energy sources — grid, solar or wind — to optimise consumption and lower energy costs.

The touch display on the tank and the smart app show the water temperature and how much hot water is left in the tank.

With a footprint of 500 × 561 mm and a height of 1700 mm, the tank fits in a utility room, a storage room, on a balcony or in another suitable space.

The control board and the electric heating element are easy to reach for service and replacement.

The software is updated remotely, over the air — more convenient and efficient.

Multi-split + DHW
Up to three indoor units for cooling and heating plus a 190 L hot water tank — all on one 8 kW outdoor unit.
8 kW · 7.9 kW cooling, 8.2 kW heating
Room 1
Wall-mounted, duct, cassette or console unit
Room 2
Wall-mounted, duct, cassette or console unit
Room 3
Wall-mounted, duct, cassette or console unit
Hot water tank 190 L
30–55 °C, up to 75 °C with the electric heater
Air conditioning
Hot water
Operating range
Hot water and heating in frosty winters, cooling in the hottest summers.
Outdoor temperature, °C
Hot water and heating down to −20 °C
Cooling at up to +55 °C
−20
−10
0
+10
+20
+30
+40
+50
7,2
Seasonal cooling efficiency
4,6
Seasonal heating efficiency
3,5
Cooling efficiency at rated capacity
R32
Eco-friendly refrigerant
Installation
The outdoor unit can stand far from the rooms and the tank. Figures from the installation manual.
80m
Total piping length
30m
To each indoor unit
5–30m
To the hot water tank
15m
Height difference to indoor units
20m
Height difference to the tank
20m
Pre-charged, no extra refrigerant
Heat recovery system
R32 refrigerant
Microchannel heat exchanger
Dual energy source system
SG Ready
Dry contact
Compatible with BMS
OTA upgrades
Wide voltage range operation
Electrical current and sensor protection
Multiple protections: current, pressure, temperature
Wi-Fi control and timer
Max. number of indoor units | Units | 3 | ||
|---|---|---|---|---|
Energy Classification | A++ / A++ | |||
Rated cooling capacity | kW | 7.90 (2.00~9.40) | ||
Rated heating capacity | kW | 8.20 (2.00~10.25) | ||
Power Supply | 220~240V 50Hz | |||
Max. rated power input | kW | 3,45 | ||
Cooling Current | A | 9,8 | ||
Heating Current | A | 9,1 | ||
SEER for cooling | 7,2 | |||
SCOP for heating | 4,6 | |||
EER | 3,5 | |||
Refrigerant Type | R32 | |||
Air Circulation | m³/h | 3500 | ||
Pre-charged pipe length | m | 20 | ||
Additional refrigerant charge | g/m | 15 | ||
Max, length for all rooms | m | 80 | ||
Max, length for one IDU | m | 30 | ||
Max, height differ, between IDU and ODU | m | 15 | ||
Max, height differ, between IDUs | m | 10 | ||
Net dimensions (W х D х H) outdoor | mm | 982×421×804 | ||
Net dimensions (W) outdoor | mm | 982 | ||
Net dimensions (D) outdoor | mm | 421 | ||
Net dimensions (H) outdoor | mm | 804 | ||
Alto Business Park, R. Alexandre Herculano 3, 2626-506 Póvoa de Santa Iria, Portugal.
Copyright © 2026 Bauf Home, Unipessoal Lda. All rights reserved.